What a safety data sheet is
A safety data sheet (SDS) is the manufacturer's document describing a chemical product's hazards, safe handling, protective equipment and emergency measures. Under OSHA's Hazard Communication Standard, SDS follow a standardized 16-section format and must be readily accessible to workers who may be exposed.
| Sections | Content |
|---|---|
| 1–3 | Identification, hazards, composition |
| 4–6 | First aid, firefighting, accidental release |
| 7–8 | Handling and storage, exposure controls and PPE |
| 9–11 | Physical and chemical properties, stability, toxicology |
| 12–15 | Ecological, disposal, transport, regulatory information |
| 16 | Other information, including revision date |
Build the product list
Start from your material list and approved submittals: adhesives, sealants, coatings, solvents, cleaners, fuels, firestopping, and anything else with a label warning. Include products your subcontractors bring on site if the GC requires a project-wide set.
Collect current SDS
- Download from the manufacturer, not from old binders; SDS are revised over time.
- Match the exact product, not a similar one from the same family.
- Ask your supplier for any SDS not publicly available.
Organize the binder
- An index by product name and manufacturer.
- Sheets in index order, with tabs.
- A digital copy on the project platform or shared drive.
- A site copy where workers can reach it.
Keep it current
Add products when they are approved or substituted, and replace outdated sheets. A short monthly check against new deliveries is usually enough.
SDS as a submittal or closeout item
Some specifications and general contractors require SDS with product data or at closeout. Format the set to those requirements so it can be submitted without rework.
This guide is general information. Your hazard communication program, training and compliance are your company's responsibility; consult a safety professional for requirements specific to your work.
We do this all day
Stuck on this? Email us.
Send us what you have and where you're stuck. Our PMP® and LEED AP BD+C credentialed staff will reply with next steps, and if you'd rather hand it off, a project-specific proposal in 48–72 hours.
Opens your email app with a short draft. Add a line and attach PDFs.
Questions we hear
Are SDS required on construction sites?
OSHA's construction standards reference the Hazard Communication Standard, which requires employers to keep SDS for hazardous chemicals and make them readily accessible. Check the current OSHA requirements and your own safety program.
Can SDS be kept electronically?
Generally yes, if workers can access them readily without barriers. Many contractors keep both a digital set and a site binder.
How old can an SDS be?
Use the manufacturer's current version. Replace sheets when the manufacturer issues a revision or the product changes.